Enviracaire EWM-220 Operations Instructions download pdf (Page 6)

USING THE MEDICINE CUP

In order to add a medicated vapor to the “mist” output:

1. Push the POWER switch to the “OFF” position and allow the Top Housing to cool.

2. Carefully add liquid medicine to medicine cup. DO NOT ll the cup more than half full.

3. Carefully place medicine cup on top of top housing.

4. Push the POWER switch to the ON position.

5. After use, remove the cup from the unit and clean any residue from the cup with

warm water.

WARNING:

DO NOT use any liquid medicine other than those specically recommended for use

with a steam vaporizer or warm mist humidier.

DO NOT pour medicine directly into the top housing openings nor add it to the water

in the tank or tray.

MINERAL ABSORPTION PAD INSTRUCTIONS

Warm mist humidiers do not spread ne mineral dust into the air that you breathe

nor on your furniture, the way that other type humidiers do. The mineral dust remains

trapped in the humidier hot water reservoir. Use of mineral absorption pads will

play a major role in capturing and removing minerals from hot water reservoir, and

preventing a stubborn mineral buildup. The unit can run without pads, but more

frequent cleaning will be required. The mineral pad for this unit is EMP-15P.

Before starting the humidier, place mineral absorption pad in the hot water

reservoir. After the humidier has been operating, the water will become HOT, and

CAUTION should be exercised when handling mineral absorption pad. It is best

to allow humidier water to cool down, and to use tongs or long tweezers when

handling pad.

2. The useful life of the mineral absorption pad will vary, depending on the mineral

content of the water used. In areas of moderate mineral content water supply,

the mineral absorption pad should be changed after approximately (3) weeks

of continuous use. If the water is “Hard Water”, the pad should be changed more

frequently. The best way to tell when the pad should be changed is to examine it

AFTER the water has cooled down, to see if it is still soft and pliable. When the pad

is near the end of its life, it becomes sti and hard and should be replaced with a

new pad. Another sign to change pad is when scale begins to buildup on interior of

hot water reservoir. If pad appears to disintegrate (normally due to use of softened

water) discontinue use of pads.

CLEANING AND MAINTENANCE

Water contains minerals and other particles. During operation most of these minerals

will remain in the water reservoir. Gradual buildup of deposits will coat the hot water

reservoir and reduce its eciency. The importance of routine cleaning and care cannot

be over-emphasized. Hard water contains more minerals and other particles.

EWM-220_OM.indd 6 3/26/07 2:53:56 PM

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

No comments

Enviracaire EWM-220 Operations Instructions Page 6